How to Remove the Screen Nokia N96

Repairs do not need to carry a mobile phone to mobile phone repair, Tips to continuously change a few simple components, such as replacing the LCD screen or the Nokia N96. However, the equipment required is a screwdriver torx 6 and the plastic levers such as credit cards, plastic lever pick guitars or special phone.

- The first step you are doing, open the battery cover, remove the battery, SIM card and memory card

- Push the slider up, then remove the two torx 6 screws with a screwdriver

- Slide the slider back opposite sides, and then release the two screws with a screwdriver torx 6

- After the screw removed, start off from the top of the phone by pulling the front cover. After the front cover off the phone, press the center navigation through the front cover. But keep in mind, when you attach the faceplate to the front of this, do from the bottom or turn over this way

- It must be the front cover was already off, then watch the tape attached to the connector plug and socket. However, to release the ribbon connector that you simply do by pulling

- Remove the LCD with a plastic slide lever

- Obviously the LCD has been freed, now you can simply replace the task of the new LCD if it is damaged. However, for reassembling the LCD, simply do the steps backwards from the earlier release of the LCD.